|
__________________ |

Outboard
Motors
| |
Mercury are the largest producer of outboard motors in the
world with manufacturing facilities in the U.S.A., China and
Japan.
An extensive range of four-stroke and two-stroke
outboards are available in the Asian market.
Swift is fully facilitated to supply and support
Mercury outboards and we have our own Mercury SPX computer
diagnostic systems that enable us to link to the motor’s ECU
and analyze any problem.
Increasingly, contemporary outboard motors are
incorporating electronics in their control systems in order
to maximize efficiency and reduce fuel consumption and most
importantly to reduce emissions. |
|

| |
Swift can supply, rig, and commission Mercury outboard
motors on any craft and as an example we have supplied and
commissioned a quadruple 300hp Verado installation on a new
passenger ferry running from Langkawi to Koh Lipe, Thailand.
We are pleased to advise Customers as to the best choice of
Mercury outboards to meet your requirements. |
|
| |
4-STROKE MOTORS
VERADO
This range is the “top of the line” and the most
sophisticated outboard motors in production. All the motors
are supercharged for optimum efficiency and with a special
mounting system are ultra-quiet in operation. They feature
“fly by wire” digital throttle and shift (DTS),
electro-hydraulic power steering and Smart Craft
instrumentation. Verados are in operation with Departments
of the Malaysian Government.
|
|
| |
 |
|
6-cylinder Verado
models are available in the following
powers: 350hp, 300hp, 275hp, 250hp, 225hp, 200hp. |
|
| |
 |
|
4-cylinder Verado
models are available in the following
powers: 200hp, 175hp, 150hp, 135hp. |
|
| |
|
|
|
|
| |
STANDARD
4-STROKE MOTORS
For operators seeking economy, low emissions and
quietness Mercury 4-strokes are the right choice.
|
|
| |
 |
|
4-cylinder models are
available in the following
powers: 115hp, 90hp, 75hp, 60hp, 50hp, 40hp. |
|
| |
 |
|
3-cylinder models are
available in the following
powers: 40hp, 30hp, 25hp. |
|
| |
 |
|
2-cylinder lightweight
motors are available in the
following powers: 20hp, 15hp,
9.9hp, 8hp. |
|
| |
 |
|
1-cylinder lightweight
motors are available in the
following powers: 6hp, 5hp, 4hp,
3.5hp, 2.5hp. |
|
| |
 |
|
For
fishermen requiring a very economical and
low emissions
4-stroke motor the 4-cylinder
Mercury 60hp “Bigfoot” is a
good choice.
The motor features a heavy duty lower unit and
is available with a tiller handle and is the new generation
that replaces polluting 60hp 2-strokes |
|
| |
2-STROKE MOTORS
Although they are gradually being phased out due to
emissions regulations 2-stroke outboards still provide a
good choice for the cost conscious operator. Mercury
manufactures a vast range of 2-stroke motors which have been
developed to give the best possible economy.
OPTIMAX
This “top of the line” Mercury 2-stroke range is
recognized as the market leader with fuel injection direct
into the cylinders to give a lean burn and lower emissions
and unparalleled fuel consumption for a 2-stroke.
|
|
| |
 |
|
V6-cylinder motors are
available in the following
powers:
300hp, 250hp, 225hp, 200hp, 175hp, 150hp, 135hp. |
|
| |
 |
|
3-cylinder motors are
available in the following
powers: 125hp, 115hp, 90hp, 75hp. |
|
| |
|
|
|
|
| |
STANDARD
2-STROKE MOTORS |
|
| |
|
|
|
|
| |
 |
|
V6-cylinder EFI
(electronic fuel injection)
Models are available in the following
powers: 250hp, 225hp, 200hp, 150hp |
|
| |
 |
|
3-cylinder models are
available in the following
powers: 90hp, 75hp, 60hp, 50hp, 40hp. |
|
| |
 |
|
2-cylinder lightweight
motors are available in the
following
powers:
40hp, 30hp, 25hp, 15hp, 9.9hp, 8hp, 6hp. |
|
| |
 |
|
1-cylinder lightweight
motors are available in the
following
powers: 5hp, 4hp, 3.3hp, 2.5hp. |
|
| |
 |
|
For
fishermen the classic 3-cylinder 2-stroke 60hp
Sea Pro
with heavy duty “Bigfoot” lower unit and
tiller handle is
still
available.
|
|
| |
|
|
|
|
Back to top of page
For detailed information check out the following sections
of the Mercury Website (click on the pictures):



Back to top of page
|